|
| |
Psion Workabout HDS Accessories |
|
Included Accessories |
- Rechargeable battery (WA3010)
- Handstrap (WA6127)
- Stylus
- Quick start guide
- One-year warranty
|
|
|
Desktop Docking Station |
Provides for a convenient way to charge the battery and connect to a PC. A dual-colored LED indicator provides easy to read charge status. A battery slot ensures that spare batteries are fully charged and ready for use. Includes an AC power supply and USB ActiveSync PC cable.
- Provides for simultaneous USB host and client functions. The Host USB port allows peripherals such as a printer, a keyboard, or a mouse to be connected while the Client USB port allows for connectivity to a desktop
- Optional Ethernet expansion module (WA4010-G1) converts docking station from USB to Ethernet.
- Download Desktop DockingStation User Guide
|
WA4003-G2
$130.00 |
|
Vehicle Cradle |
Provides power to charge the battery and operate the unit. Allows for quick insertion and removal while holding the Workabout HDS securely in place. Accepts DC power sources from 9V to 24V. Includes a 15-pin cable that can be connected to optional port replicator (WA4005).
- Compatible with the RAM B 101 mount (WA4006) that can be adjusted three-dimensionally to give maximum display readability and device usability in any vehicle.
- Requires a vehicle cradle power cable (CA1210) if charging capabilities are needed.
|
WA1310-G2
$205.00 |
|
Vehicle Cradle Power Cable |
This power extension cord is ideal for connecting a vehicle dock to a forklift or vehicle power supply. Waterproof and 6 feet in length. |
CA1210
$120.00 |
|
|
AC Wall Charger |
Powers the Workabout HDS and recharges the battery. Connects to the Workabout DC power jack. Can also be used to power to the office dock. Includes plug adapters for worldwide use. Accepts 110V-240V input. |
PS1050-G1
$35.00 |
|
|
ActiveSync Cable |
Provides for communication between the Workabout HDS and a PC via the ActiveSync software. Attaches to the Workabout HDS tether connector and to the desktop USB port. The Workabout HDS is not charged through this cable. |
WA4001-G2
$65.00 |
|
|
Vehicle Charger |
Powers the Workabout HDS and recharges the battery. Connects to the Workabout DC power jack and a vehicle’s cigarette lighter plug. Includes a replaceable 2A fuse. Accepts 10V-30V input. Replaces part number WA3113-G2.
Download Vehicle Charger User Guide. |
PS3050
$50.00 |
|
|
Stylus |
Pack of five (5) replacement styluses. Fits into the holder located on the top of the Workabout HDS. |
WA6100-G1
$50.00 |
|
|
Rechargeable Battery, 4400mAh LiION |
Replacement for the original battery. Allows for extended field use when used as a secondary battery. Provides 4400 mAh of capacity at 3.7 volts. |
WA3010
$145.00 |
|
|
Screen Protectors |
Pack of four (4). |
WA6112-G2
$48.00 |
|
|
Handstrap |
Attaches to the back of the Workabout HDS and provides a solid grip of the unit. Includes two screws and instructions for assembly. |
WA6127
$35.00 |
|
|
Handstrap with Handle |
Attaches to the back of the Workabout HDS and provides a solid grip of the unit. The additional loop can be used as a carry handle. Includes two screws, a small plastic stylus, and instructions for assembly. |
WA6125
$35.00 |
|
|
Shoulder Strap for Carry Case |
Six foot (6’) shoulder strap with pad. Attaches to metal clips on the protective cases. |
30585-001
$30.00 |
|
|
Carry Case with Belt Clip |
Removing the handheld is easily done through a “trap door” on the back of the case. The tether connector, DC power jack, speaker, and stylus are exposed for easy access. The belt clip can be attached to the strap or to the back of the case. The strap includes a belt loop. Four (4) ‘D’ rings are available for attaching the optional shoulder strap. |
WA6190-G2
$75.00 |
|
|
Rubber Sleeve |
Snug fitting, thick rubber sleeve protects the Workabout HDS from knocks and abrasions during normal use. Allows full access to the tether connector, DC power jack, speaker, stylus, and battery. Three (3) loops are available for attaching straps. |
WA6401
$85.00 |
|
|
Carry Pouch |
Leather strap attaches to belt and is used to carry the Workabout HDS in a "holster style". Keeps the unit close at hand while performing other tasks or traveling. Includes a heavy duty metal swivel that detaches from the pouch and two (2) ‘D’ rings for attaching optional straps. |
WA6091
$75.00 |
|
|
Tether to USB A Cable |
Enables USB A devices such as a scanner, printer, memory stick, GPS receiver or external scanner to be connected to the Workabout HDS. Attaches to the Workabout HDS tether connector with three thumb-screws. |
WA1002
$75.00 |
|
|
Tether to RS232 Serial Cable |
Allows RS232 serial devices such as GPS receivers, laser ranger finders, and printers to be connected to the Workabout HDS. Attaches to the Workabout HDS tether connector with three thumb-screws. Includes one DB9M serial port. |
WA4020-G2
$65.00 |
|
|
Rechargeable Battery, 3300mAh LiION |
Replacement battery. Provides 3300 mAh of capacity at 3.7 volts. Allows for extended field use when used as a secondary battery. Requires a WA3016-G2 battery door. |
WA3006
$99.00 |
|
|
Door for 3300mAh LiION Battery |
Replacement battery cover for use with a 3300mAh LiION battery. |
WA3016-G2
$15.00 |
|
|
Door for 4400mAh LiION Battery |
Replacement battery cover for use with a 4400mAh LiION battery. |
WA3018-G2
$15.00 |
|
|
